Quick Answer: What Is Thermodynamic Cycle

What thermodynamic cycle is used for power plants?

The Rankine cycle or Rankine Vapor Cycle is the process widely used by power plants such as coal-fired power plants or nuclear reactors. In this mechanism, a fuel is used to produce heat within a boiler, converting water into steam which then expands through a turbine producing useful work.

How many cycles are there in thermodynamics?

The following classification of thermodynamic cycles is made according to their constituent thermodynamic processes. In practice, simple idealized thermodynamic cycles are usually made out of four thermodynamic processes. In general, the following processes usually constitute thermodynamic cycles: Adiabatic process.

What is thermodynamic process Class 11?

Thermodynamic Process It is the operation which brings change in the state of the system. Thermodynamic processes are. (i) Isothermal process In which temperature remains constant, i.e., (dT = 0, Δ U = 0). (ii) Isochoric process In which volume remains constant, i.e., (Δ V = 0).

What is ideal thermodynamic cycle?

Ideal cycles are simplified thermodynamic closed cycles to analyze the compression, combustion, and expansion process in an engine with a focus on extraction of work from combustion of the fuel–air mixture.

Which are the thermodynamic cycle used for refrigeration?

The vapor-compression cycle is used by many refrigeration, air conditioning and other cooling applications and also within heat pump for heating applications. There are two heat exchangers, one being the condenser which is hotter and releases heat and the other being the evaporator which is colder and accepts heat.

What is meant by thermodynamic process?

A thermodynamic process is defined as a change from one equilibrium macrostate to another macrostate. The initial and final states are the defining elements of the process. In this process energy may be transferred form or into the system and also work can be done by or on the system.

What is thermodynamic process in mechanical engineering?

Thermodynamics. The process of heating or cooling of a gas is defined as a thermodynamic process. It has been observed that during a thermodynamic process, change takes place in various properties of the gas such as pressure, volume, temperature, specific energy, specific enthalpy etc.

What is thermodynamic property?

Thermodynamic properties are defined as characteristic features of a system, capable of specifying the system’s state. “Specific” properties are expressed on a per mass basis. If the units were changed from per mass to, for example, per mole, the property would remain as it was (i.e., intensive or extensive).

What are the different types of thermodynamic processes?

The four types of thermodynamic process are isobaric, isochoric, isothermal and adiabatic.

Which is true of a thermodynamic cycle?

A thermodynamic cycle is a series of thermodynamic processes which returns a system to its initial state. Properties depend only on the thermodynamic state and thus do not change over a cycle. Variables such as heat and work are not zero over a cycle, but rather depend on the process.

Is Carnot cycle a thermodynamic cycle?

The Carnot cycle is a theoretical ideal thermodynamic cycle proposed by French physicist Sadi Carnot in 1824 and expanded upon by others in the 1830s and 1840s. It is not an actual thermodynamic cycle but is a theoretical construct.

What is a thermodynamic process Class 12?

Solution. A process by which two or more state variables of a system can be changed is called a thermodynamic process.

Do IC engine operate on thermodynamic cycles?

Thermodynamic Cycles of Internal Combustion Engines for Increased Thermal Efficiency, Constant-Volume Combustion, Variable Compression Ratio, and Cold Start 2007-01-4115. The engine with these features may serve as an alternative to the Atkinson cycle engine or the Miller cycle engine.

What do you understand by thermodynamic equilibrium?

Thermodynamic equilibrium, condition or state of a thermodynamic system, the properties of which do not change with time and that can be changed to another condition only at the expense of effects on other systems.

What is the most efficient thermodynamic cycle and why?

Classical thermodynamics indicates that the most efficient thermodynamic cycle operating between two heat reservoirs is the Carnot engine [1] , and a basic theorem expresses that any reversible cycle working between two constant temperature levels should have the same efficiency as a Carnot cycle [2].

What is thermodynamic cycle or cyclic processes?

In a cyclic process, the system starts and returns to the same thermodynamic state. The net work involved is the enclosed area on the P-V diagram. If the cycle goes clockwise, the system does work. A cyclic process is the underlying principle for an engine.

What is the difference between thermodynamic cycle and mechanical cycle?

The engine operates on a mechanical cycle, but the working fluid does not go through a complete thermodynamic cycle. As we said before, any thermodynamic cycle is essentially a closed cycle in which, the working substance undergoes a series of processes and is always brought back to the initial state (Fig. 13.5).

What are the four thermodynamic cycles?

Classification of Thermodynamic Cycle Reversible Cycle. In a reversible process, there should be no loss of heat due to friction, conduction or radiation, etc. Irreversible Cycle. Isothermal and Adiabatic. Constant Volume, Constant Pressure and Constant pv. Throttling. Note: 1# Carnot Cycle. #2 Stirling Cycle.

What is a thermodynamic power cycle?

A power cycle consists of a series of repeating thermodynamic processes along a closed process path, while heat is converted into mechanical work. The most widespread working medium is water. The power cycle involves the water’s change of phase from a liquid state into superheated steam.

What is Carnot cycle in thermodynamics?

: an ideal reversible closed thermodynamic cycle in which the working substance goes through the four successive operations of isothermal expansion to a desired point, adiabatic expansion to a desired point, isothermal compression, and adiabatic compression back to its initial state.

What is thermodynamic path?

A process is defined as the path of thermodynamic states which the system passes through as it goes from an initial state to a final state. Understanding the nature of the process path is very important as heat and work depend on the path.

What is the name of the thermodynamic cycle?

The basic thermodynamic cycle used in the gas turbine is the Brayton cycle. This cycle, illustrated by a pressure–temperature diagram in Fig. 1, was described originally by Joule in 1851 and patented by Brayton in 1867.

What is thermodynamic process example?

The process, during which the volume of the system remains constant, is an isochoric process. Heating of a gas in a closed cylinder is an example of the isochoric process. The change in temperature for a given amount of heat is determined by the specific heat of the gas at a constant volume.